mqtt-ir-remote/IRremoteESP8266/ReleaseNotes.md
2018-07-10 00:04:36 +02:00

170 lines
5.5 KiB
Markdown

# Release Notes
## _v2.3.2 (20180126)_
**[Bug Fixes]**
- Integer underflow caused device not to respond in `sendJVC()` (#401)
**[Features]**
- Initial support for sending & receiving Carrier HVAC codes. (#387)
- Add Pronto HEX code support to _gc_decode_ tool. (#388)
**[Misc]**
- Make mDNS independent of MQTT in IRMQTTServer example code. (#390 #391)
## _v2.3.1 (20171229)_
**[Bug Fixes]**
- Setting `#define SEND_FUJITSU_AC false` caused a compilation error (#375)
- Integer underflow caused huge `space()` in `sendGeneric()` (#381)
**[Features]**
- Support sending & receiving Lasertag codes. (#374)
- Reduce the library footprint by using a new `sendGeneric()` routine. (#373)
**[Misc]**
- Lots of grammar & typo fixes. (#378)
- Update keywords.txt for Arduino IDE users (#371)
- Update pins in examples so they are compatible with Adafruit boards. (#383)
## _v2.3.0 (20171208)_
**[Bug Fixes]**
- Panasonic-based protocols had incorrect message gap. (#358)
- Formatting error for large rawData values in example code. (#355)
- Off-by-one error in payload_copy malloc. (#337)
- Off-by-one error in unit test helper routines (#363)
**[Features]**
- Support sending and receiving Midea A/C codes.
- Support for receiving Kelvinator A/C codes. (#332)
- Support more operation features for Daikin A/Cs.
- Support for decoding Daikin A/Cs.
- Support sending and receiving Toshiba A/Cs. (#333)
- Support sending and receiving AR-DB1 Fujitsu A/C codes. (#367)
- Add new AutoAnalyseRawData.sh & RawToGlobalCache.sh tools (#345) (#343)
- Support for MagiQuest wands. (#365)
**[Misc]**
- Add checksum verification to Kelvinator A/C decodes. (#348)
- Changes to the threshold reporting of UNKNOWN messages (#347)
- Major re-work of Daikin A/C support.
- Sending for all A/Cs added to MQTT example code.
- MQTT example code improvements. (#334)
- IRrecvDumpV2 significant output improvements. (#363)
- Improved unit test coverage for the library.
## _v2.2.1 (20171025)_
**[Features]**
- Support for sending and decoding Nikai TV messages. (#311, #313)
- gc_decode: External utility to decode Global Cache codes. (#308, #312)
- IRMQTTServer: Example code to send IR messages via HTTP & MQTT. (#316, #323)
- Improve converting 64bit values to hexadecimal. (#318)
**[Misc]**
- IRrecvDump.ino code is now deprecated. Use IRrecvDumpV2.ino instead. (#314)
## _v2.2.0 (20170922)_
**[Bug Fixes]**
- Add printing output of RC-MM and RC-5X protocols in example code. (#284)
- LG timing improvements based on observations (#291)
**[Features]**
- Automatic capture timing calibration for some protocols. (#268)
- Support for creating & sending Trotec AC codes. (#279)
- Support for creating & sending Argo Ulisse 13 DCI codes. (#280 #300)
- Move to 2 microsecond timing resolution for capture of codes. (#287)
- Capture buffer changes:
- Size at runtime. (#276)
- Message timeout at runtime. (#294)
- Simplify creating & using a second buffer (#303)
- New example code:
- Trotec A/C (#279)
- LG A/C units (#289)
- Argo Ulisse 13 DCI codes. (#300)
## _v2.1.1 (20170711)_
**[Bug Fixes]**
- GlobalCache incorrectly using hardware offset for period calc. (#267)
**[Features]**
- Support reporting of 'NEC'-like 32-bit protocols. e.g. Apple TV remote (#265)
- Add an example of sendRaw() to IRsendDemo.ino (#270)
## _v2.1.0 (20170704)_
**[Features]**
- Support for sending Pronto IR codes. (#248)
- Support for sending Fujitsu A/C codes. (#88)
- Minor improvements to examples.
## _v2.0.3 (20170618)_
**[Bug fixes]**
- Capture buffer could become corrupt after large message, breaking subsequent decodes. (#253)
## _v2.0.2 (20170615)_
**[Bug fixes]**
- Correct decode issue introduced in v2.0.1 affecting multiple protocol decoders (#243)
- Correct post-message gap for the Panasonic protocol(s) (#245)
- Incorrect display of the decoded uint64_t value in the example code. (#245)
## _v2.0.1 (20170614)_
**[Bug fixes]**
- Decoding protocols when it doesn't detect a post-command gap, and there is no more data. (#243)
- Incorrect minimum size calculation when there is no post-command gap. (#243)
## _v2.0.0 - 64 bit support and major improvements (20170612)_
**[Misc]**
- This is almost a complete re-write of the library.
**[Features]**
- All suitable protocols now handle 64-bit data messages and are repeatable via an optional argument.
- Unit tests for all protocols.
- Far better and stricter decoding for most protocols.
- Address & command decoding for protocols where that information is available.
- Much more precise timing for generation of signals sent.
- Lower duty-cycles for some protocols.
- Several new protocols added, and some new sending and decoding routines for existing ones.
- Ability to optionally chose which protocols are included, enabling faster decoding and smaller code footprints if desired.
- Support for far larger capture buffers. (e.g. RAWLEN > 256)
**[Bug fixes]**
- Numerous bug fixes.
## _v1.2.0 (20170429)_
**[Features]**
- Add ability to copy IR capture buffer, and continue capturing. Means faster and better IR command decoding.
- Reduce IRAM usage by 28 bytes.
- Improve capture of RC-MM & Panasonic protocols.
- Upgrade IRrecvDumpV2 to new IR capture buffer. Much fewer corrupted/truncated IR messages.
## _v1.1.1 (20170413)_
**[Bug fixes]**
- Fix a reported problem when sending the LG protocol. Preemptive fix for possible similar cases.
- Fix minor issues in examples.
**[Features]**
- Add documentation to some examples to aid new people.
- Add ALPHA support for RC-MM protocol. (Known to be currently not 100% working.)