mqtt-ir-remote/IRremoteESP8266/examples/IRrecvDump/IRrecvDump.ino
2018-07-10 00:04:36 +02:00

105 lines
3.3 KiB
C++

/*
* IRremoteESP8266: IRrecvDump - dump details of IR codes with IRrecv
* Copyright 2009 Ken Shirriff, http://arcfn.com
*
***** DEPRECATED - DO NOT USE *****
* Unless you know what you are doing, you should be using the
* IRrecvDumpV2.ino sketch/example instead for capturing & decoding IR messages.
* In almost ALL ways it is BETTER, FASTER, and MORE DETAILED.
*
* This code is left only for legacy reasons, and as another simple example of
* how to use the IRremoteESP8266 library.
*
* As of November 2017 it will no longer be updated or supported.
* You have been warned.
***** DEPRECATED - DO NOT USE *****
*
* An IR detector/demodulator must be connected to the input RECV_PIN.
* Version 0.2 Oct 2017
* Based on Ken Shirriff's IrsendDemo Version 0.1 July, 2009,
* JVC and Panasonic protocol added by Kristian Lauszus
* (Thanks to zenwheel and other people at the original blog post)
* LG added by Darryl Smith (based on the JVC protocol)
*/
#ifndef UNIT_TEST
#include <Arduino.h>
#endif
#include <IRremoteESP8266.h>
#include <IRrecv.h>
#include <IRutils.h>
// an IR detector/demodulator is connected to GPIO pin 2
uint16_t RECV_PIN = 2;
IRrecv irrecv(RECV_PIN);
decode_results results;
void setup() {
Serial.begin(115200);
irrecv.enableIRIn(); // Start the receiver
}
void dump(decode_results *results) {
// Dumps out the decode_results structure.
// Call this after IRrecv::decode()
uint16_t count = results->rawlen;
if (results->decode_type == UNKNOWN) {
Serial.print("Unknown encoding: ");
} else if (results->decode_type == NEC) {
Serial.print("Decoded NEC: ");
} else if (results->decode_type == SONY) {
Serial.print("Decoded SONY: ");
} else if (results->decode_type == RC5) {
Serial.print("Decoded RC5: ");
} else if (results->decode_type == RC5X) {
Serial.print("Decoded RC5X: ");
} else if (results->decode_type == RC6) {
Serial.print("Decoded RC6: ");
} else if (results->decode_type == RCMM) {
Serial.print("Decoded RCMM: ");
} else if (results->decode_type == PANASONIC) {
Serial.print("Decoded PANASONIC - Address: ");
Serial.print(results->address, HEX);
Serial.print(" Value: ");
} else if (results->decode_type == LG) {
Serial.print("Decoded LG: ");
} else if (results->decode_type == JVC) {
Serial.print("Decoded JVC: ");
} else if (results->decode_type == AIWA_RC_T501) {
Serial.print("Decoded AIWA RC T501: ");
} else if (results->decode_type == WHYNTER) {
Serial.print("Decoded Whynter: ");
} else if (results->decode_type == NIKAI) {
Serial.print("Decoded Nikai: ");
}
serialPrintUint64(results->value, 16);
Serial.print(" (");
Serial.print(results->bits, DEC);
Serial.println(" bits)");
Serial.print("Raw (");
Serial.print(count, DEC);
Serial.print("): {");
for (uint16_t i = 1; i < count; i++) {
if (i % 100 == 0)
yield(); // Preemptive yield every 100th entry to feed the WDT.
if (i & 1) {
Serial.print(results->rawbuf[i] * RAWTICK, DEC);
} else {
Serial.print(", ");
Serial.print((uint32_t) results->rawbuf[i] * RAWTICK, DEC);
}
}
Serial.println("};");
}
void loop() {
if (irrecv.decode(&results)) {
dump(&results);
Serial.println("DEPRECATED: Please use IRrecvDumpV2.ino instead!");
irrecv.resume(); // Receive the next value
}
}