mqtt-ir-remote/IRremoteESP8266/examples/IRServer/IRServer.ino

124 lines
3.6 KiB
Arduino
Raw Normal View History

2018-07-09 22:04:36 +00:00
/*
* IRremoteESP8266: IRServer - demonstrates sending IR codes controlled from a webserver
* Version 0.2 June, 2017
* Copyright 2015 Mark Szabo
*
* An IR LED circuit *MUST* be connected to ESP8266 pin 4 (D2).
*
* TL;DR: The IR LED needs to be driven by a transistor for a good result.
*
* Suggested circuit:
* https://github.com/markszabo/IRremoteESP8266/wiki#ir-sending
*
* Common mistakes & tips:
* * Don't just connect the IR LED directly to the pin, it won't
* have enough current to drive the IR LED effectively.
* * Make sure you have the IR LED polarity correct.
* See: https://learn.sparkfun.com/tutorials/polarity/diode-and-led-polarity
* * Typical digital camera/phones can be used to see if the IR LED is flashed.
* Replace the IR LED with a normal LED if you don't have a digital camera
* when debugging.
* * Avoid using the following pins unless you really know what you are doing:
* * Pin 0/D3: Can interfere with the boot/program mode & support circuits.
* * Pin 1/TX/TXD0: Any serial transmissions from the ESP8266 will interfere.
* * Pin 3/RX/RXD0: Any serial transmissions to the ESP8266 will interfere.
* * ESP-01 modules are tricky. We suggest you use a module with more GPIOs
* for your first time. e.g. ESP-12 etc.
*/
#ifndef UNIT_TEST
#include <Arduino.h>
#endif
#include <ESP8266WiFi.h>
#include <ESP8266WebServer.h>
#include <ESP8266mDNS.h>
#include <IRremoteESP8266.h>
#include <IRsend.h>
#include <WiFiClient.h>
const char* ssid = ".....";
const char* password = ".....";
MDNSResponder mdns;
ESP8266WebServer server(80);
IRsend irsend(4); // An IR LED is controlled by GPIO pin 4 (D2)
void handleRoot() {
server.send(200, "text/html",
"<html>" \
"<head><title>ESP8266 Demo</title></head>" \
"<body>" \
"<h1>Hello from ESP8266, you can send NEC encoded IR" \
"signals from here!</h1>" \
"<p><a href=\"ir?code=16769055\">Send 0xFFE01F</a></p>" \
"<p><a href=\"ir?code=16429347\">Send 0xFAB123</a></p>" \
"<p><a href=\"ir?code=16771222\">Send 0xFFE896</a></p>" \
"</body>" \
"</html>");
}
void handleIr() {
for (uint8_t i = 0; i < server.args(); i++) {
if (server.argName(i) == "code") {
uint32_t code = strtoul(server.arg(i).c_str(), NULL, 10);
#if SEND_NEC
irsend.sendNEC(code, 32);
#endif // SEND_NEC
}
}
handleRoot();
}
void handleNotFound() {
String message = "File Not Found\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET)?"GET":"POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for (uint8_t i = 0; i < server.args(); i++)
message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
server.send(404, "text/plain", message);
}
void setup(void) {
irsend.begin();
Serial.begin(115200);
WiFi.begin(ssid, password);
Serial.println("");
// Wait for connection
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
if (mdns.begin("esp8266", WiFi.localIP())) {
Serial.println("MDNS responder started");
}
server.on("/", handleRoot);
server.on("/ir", handleIr);
server.on("/inline", [](){
server.send(200, "text/plain", "this works as well");
});
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}
void loop(void) {
server.handleClient();
}